XTROJET 330 Cordless Robotic Pool Floor Cleaner

Sale price
$179
Regular price
$249
You save
29%
✔ SAFE CORDLESS CLEANING : XTROJET pool robotic cleaner is cordless safe. Transparent canister, make sure you know what is inside the robot before opening.

✔ DESIGNED FOR LEAVES AND DIRT : XTROJET’s unique water passage system with XL sized mouths can pick up soft leaves up to 5 inches in length, best in the class! Also collects common debris like sand, twigs, dirt and dead bugs etc.

✔ EXTRA POWER AND DEBRIS CAPACITY : Strong suction at 18.7gal/min water flow through a 250-micron filter, 1 gallon debris capacity largest in class. For FLAT bottom pools up to 30 feet and up to 625 sq ft in size.

✔ EASY TO USE, EASY TO RETRIEVE : Lightweight at 8.25 pounds, can be lifted with one hand. Visible buoy kit for waterline retrieval (robot invisible when water is cloudy). One-button power on, 3-position pin setup for different pool sizes.

✔ ENVIRONMENTAL FRIENDLY : Long mileage 4,430ft cleaning distance in one charge cycle (longest range in class). No-frills minimal packaging, protects the planet!

✔ AWARD-WINNING POOL CLEANING BRAND : Kokido is an award-winning brand with 30 years’ experience in pool cleaning. The product comes with a 1-year warranty and worry-free customer support.
In stock and ready for shipping
XTROJET 330 Cordless Robotic Pool Floor Cleaner

XTROJET 330 Cordless Robotic Pool Floor Cleaner

Sale price
$179
Regular price
$249

Price
Product Type
Suction
Debris Capacity
Filtration
Weight
Pool Pole / Reach
Pole Connector
XTROJET 330 Cordless Robotic Pool Floor Cleaner
$179.00
Cordless Robotic Pool Vacuum
19 Gal/min (Power rating: 9 stars)
1 Gal
All Purpose 250 micron
8.25 lbs
n/a
n/a

 Quick Start Manual

 Quick Setup Video

 Troubleshoot Video

 User Manual

 

Frequently Asked Questions

Can I use the robot in in-ground pools?
Yes, the robot can be used in in-ground pools.

Can I use the robot in above-ground pools?
Yes, the robot can be used in above-ground pools.

What is the recommended pool size to use the robot?
The recommended pool size is 24ft in diameter or 484 ft2 in total area.

Can I clean algae with the robot?
No, the robot is for daily maintenance to collect debris on the pool floor like leaves, sand, and dead bugs. It can catch some algae in the process but is not designed for it. To clean algae properly you need to use chemicals and shock your pool. Please ask your pool professional for more details on how to remove algae.

How long is the working time of the robot?
The XTROJET 330 can run up to 90 mins with a full charge.

Can I use the robot in a saltwater pool?
Yes, you can use it in a saltwater pool, make sure all salt is dissolved before deploying the pool cleaner.

Can the robot clean the waterline?
The XTROJET 330 is designed to collect debris on the pool floor. Does not climb the walls of the pool.

How should I store my robot?
Make sure the robot is dry and clean, and recharge the product for 4-6 hours before storing.

My robot stops in the middle of the pool or does not move. What should I do?
Please ensure there are no obstructions on the pool floor like small rocks, toys, or any object that can block the robot's path. Turn off the filtration system 15 mins before deploying the robot. If the pool floor has slimy or slippery algae, please remove any algae with a chemical treatment and brush the pool bottom before deploying the robot. Please check the robot head can turn freely and that the side flap is in good condition.
In case the troubleshooting solutions cannot solve the problem, please contact our customer service for assistance.

The robot is switched to ON mode, but the motor does not start running.
The water sensor may be stained, use a cotton bud soaked with lemon juice, vinegar, or any acid solvent to remove the stains on the water sensor. The sensor is 2 metal pins located next to the power switch.
In case the troubleshooting solutions cannot solve the problem, please contact our customer service for assistance.

The robot does not capture the debris.
Check the suction mouth of the robot is not clogged with debris or a large object. Remove the debris and empty the debris compartment. Ensure the debris compartment is properly closed.
In case the troubleshooting solutions cannot solve the problem, please contact our customer service for assistance.

The swivel head rotates repeatedly.
There could be air trapped inside the robot. Submerge the robot while it is still off in the pool and gently shake it a few times to facilitate the discharge of air before switching it on (while the robot is still submerged). The swivel head may rotate repeatedly for a short time once the robot sinks to the pool bottom. This phenomenon will stop once the air trapped inside the robot is discharged and the robot will begin to move regularly.

Some parts of the pool are covered by the cleaning path of the robot
Follow the instructions in the quick start manual to adjust the locking pin position to change the travel path of the robot.
- Position No. 1, for pools where the shortest side is 9.8ft (3m) or above.
- Position No. 2, for pools where the shortest side is around 9.8ft (3m).
- Position No. 3, for pools where the shortest side is 9.8ft (3m) or below.